Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

K&N 71-3082 Performance Air Intake System

K and N Air Filter Engine Cold Air Intake Performance Kit

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

K&N 57-2583 Performance Air Intake System

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

K&N 69-6011TS Performance Air Intake System

K&N 71-3070 Performance Air Intake System

K&N 57-2592 Performance Air Intake System

K&N 57-1561 Performance Air Intake System

K&N 57-3082 Performance Air Intake System

K&N 71-1561 Performance Air Intake System

K&N 77-3078KTK Performance Air Intake System

The K&N 69-1208TS Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Accord models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-1208TS cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the passenger side wheel well directing cooler outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

K&N 69-1208TS Performance Air Intake System

K&N 57-1522 Performance Air Intake System

K&N 57i Series induction kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. The extra surface area of these open-air air filters provides even more airflow at lower restriction than a K&N O/E replacement filter which is limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adapters are made from high quality materials such as steel, aluminum, silicon or reinforced nylon to ensure long life. 57i Series Intakes are not legal for use in California and other US States adopting California emission standards.

engine cold air intake performance kit